PPR pipe machine is mainly used to produce PPR hot and cold water pipes. PPR pipe extrusion line is composed of extruder, mold, vacuum calibration tank, spray cooling tank, haul off machine, cutting machine, stacker and so on. PPR pipe extruder machine and haul off machine adopt frequency speed regulation, PPR pipe cutter machine adopts chipless cutting method and PLC control, fixed-length cutting, and cutting surface is smooth. FR-PPR glass fiber PPR pipe is composed of three layers of structure. The inner and outer layer is PPR, and the middle layer is fiber reinforced composite material. The three layers are co-extruded. Our PPR pipe extrusion line can fully satisfy customer requirement. Our PPR pipe making machine can process wide range of material, including HDPE, LDPE, PP, PPR, PPH, PPB, MPP, PERT, etc. Our PPR pipe production line can produce from size of minimum 16mm to 160mm with single layer or multi-layer or even multi-layer with double cavity to save machine cost and operation cost.PPR pipes can be used for the following applications: Conveyance of potable water Hot and cold water transportation Underfloor heating Central heating installations in houses and industries Industrial transportations (chemical fluids and gasses) Compared with PE pipe, PPR pipe can be used to transport hot water. Usually, it is used inside building for hot water supply. Nowadays, there are many kinds of PPR pipe, for example, PPR fiberglass composite pipe, also PPR with uvioresistant outer layer and antibiosis inner layer.Extrusion Die Head Extrusion die head/mold apply spiral structure, each material flow channel is placed evenly. Each channel is after heat treatment and mirror polishing to ensure material flow smoothly. Die with spiral mandrel, it ensures no delay in the flow channel which can improve pipe quality. Particular disc design on calibration sleeves ensures high speed extrusion. Die head structure is compact and also provide stable pressure, always from 19 to 20Mpa. Under this pressure, pipe quality is good and very little effect on the output capacity. Can produce single layer or multi-layer pipe.Vacuum Calibration Tank Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. We use double-chamber structure. First chamber is in short length, to ensure very strong cooling and vacuum function. As calibrator is placed in the front of first chamber and pipe shape is formed mainly by calibrator, this design can ensure quick and better forming and cooling of pipe. Double-strand vacuum tank is controlled individually, which makes convenient operation as single one. Stable and reliable pressure transmitter and vacuum pressure sensor are adopted to realize automatic control.Spray Cooling Water Tank Cooling tank is used to cool pipe further.Haul Off machine Haul off machine provides sufficient traction force to pull pipe stably. According to different pipe sizes and thickness, our company will customize traction speed, number of claws, effective traction length. To ensure match pipe extrusion speed and forming speed, also avoid deformation of pipe during traction.Cutting machine PPR pipe cutting machine also called PPR pipe cutter machine is controlled by Siemens PLC, working together with haul off unit to have precise cutting. Use blade type cutting, pipe cutting surface is smooth. Customer can set the length of pipe they want to cut. With individual designed of chipless cutter. Driven by motor and synchronous belts which ensures normal cutting during high speed running.

Model	Pipe diameter scope	Host mode	Production capacity	Installed power	Production line length
PP-R-63	20-63	SJ65,SJ25	120	94	32
PP-R-110	20-110	SJ75,SJ25	160	175	38
PP-R-160	50-160	SJ90,SJ25	230	215	40
PE-RT-32	16-32	SJ65	100	75	28

Stacker To support and unload pipes. Length of stacker can be customized. Pipe surface protection With roller, to protect pipe surface when moving pipe. Central Height Adjustment With simple adjustment device to adjust the central height for different pipe sizes.Single Screw Extruder Based on 33:1 L/D ratio for screw design, we have developed 38:1 L/D ratio. Compared with 33:1 ratio, 38:1 ratio has advantage of 100% plasticization, increase output capacity by 30%, reduce power consumption up to 30% and reach almost linear extrusion performance.Special Design of Calibrator Calibrator is specially designed to make more pipe area touches with cooling water directly. This design make better cooling and forming of square pipes. Automatic Vacuum Adjusting System This system will control vacuum degree within set range. With inverter to control vacuum pump speed automatically, to save power and time for adjustment. Silencer We place silencer on the vacuum adjust valve to minimize noise when air come into the vacuum tank. Pressure Relief Valve To protect the vacuum tank. When vacuum degree reach maximum limitation, the valve will open automatically to decrease vacuum degree to avoid broken of tank. Vacuum degree limitation can be adjusted. Automatic water control system Special designed water control system, with water continuously enter in and water pump to drain hot water out. This way can ensure low temperature of water inside chamber. Whole process is fully automatic. Water, Gas Separator To separate the gas water water. Gas exhausted from upside. Water flow into the downside. Centralized Drainage Device All water drainage from vacuum tank are integrated and connected into one stainless pipeline. Only connect the integrated pipeline to outside drainage, to make operation easier and faster. Half Round Support Half round support is processed by CNC, to ensure it can fit pipe exactly. After pipe moves out from calibration sleeve, the support will ensure pipe roundness inside vacuum tank.Water Tank Filter With filter in the water tank, to avoid any big impurities when outside water comes in. Quality Spray Nozzle Quality spray nozzles have better cooling effect and not easy blocked by impurities. Double Loop Pipeline Ensure continuous water supply to the spray nozzle. When the fliter blocked, the other loop can used to supply water temporarily. Pipe Support Adjusting Device With handwheel to adjust position of the up and down nylon wheel to keep pipe in the central line all the time.Separate Traction Motor Each claw has its own traction motor, controlled individually which makes convenient operation as single strand, additionally, with the upper caterpillar belt stop device, to ensure roundness of pipe. Customers can also choose servo motor to have bigger traction force, more stable traction speed and wider range of traction speed. Separate Air Pressure Control Each claw with it own air pressure control, more accurate, operation is easier. Pipe Position Adjustment Specially designed position adjustment system can make tube in the central of haul off unit.Aluminum Clamping Device Apply aluminum clamping device for different pipe sizes, eash size has it own clamping device. This structure will make pipe stay in the central exactly. No need to adjust the central height of clamping device for different pipe sizes. Precision Guide Rail Apply linear guide rail, cutting trolly will move along guide rail. Cutting process stable and cutting length accurate. Blade Adjustment System With ruler to show different position of blade to cut different pipe size. Easy to adjust blade position.1. Three- layer co-extrusion die head, thickness of each layer is uniform 2. PPR fiberglass composite pipe has high strength, small deformation at high temperature, low expansion coefficient. Compared with PP-R pipe, PPR fiberglass composite pipe saves cost 5%-10%。 3. The line adopts PLC control system with HMI which is easy to operate and has function of linkage.Simens Touch Screen and PLC Apply program developed by our company, have English or other languages to be input into the system. Spiral Structure of Barrel Feeding part of barrel use spiral structure, to ensure material feed in stable and also increase feeding capacity. Special Design of Screw Screw is designed with special structure, to ensure good plasticization and mixing. Unmelted material can not pass this part of screw. Air Cooled Ceramic Heater Ceramic heater ensure long working life. This design is to increase the area which heater contact with air. To have better air cooling effect. High Quality Gearbox Gear accuracy to be ensured 5-6 grade and lower noise below 75dB. Compact structure but with high torque.CNC Processing Every part of extrusion die head is processed by CNC to ensure precision. High Quality Material Apply high quality material for extrusion die head. Die head has high strength and will not deform during long time use under high temperature condition. Smooth Flow Channel Have mirror polishing on flow channel and every part which contacts with melt. To make material flow smoothly.